PDA

View Full Version : Bizhub c253 colours missing


Custom Search


barber782
05-30-2018, 03:05 PM
Arrived at a customers today only to find that all the colours were either feint or missing. See attached.
Tcr levels look fine
Any ideas?https://uploads.tapatalk-cdn.com/20180530/171d2bdcd1300f4f45d0251be3dd5801.jpghttps://uploads.tapatalk-cdn.com/20180530/cbdcc9e4790b72212dd51724ca515f35.jpg

Sent from my GT-I9195 using Tapatalk

Phil B.
05-30-2018, 06:07 PM
Arrived at a customers today only to find that all the colours were either feint or missing. See attached.
Tcr levels look fine
Any ideas?https://uploads.tapatalk-cdn.com/20180530/171d2bdcd1300f4f45d0251be3dd5801.jpghttps://uploads.tapatalk-cdn.com/20180530/cbdcc9e4790b72212dd51724ca515f35.jpg

Sent from my GT-I9195 using Tapatalk

what have you done to it?
what life is left on drums developer?
have you cleaned the LSU shield glass?

not much info given to receive help

copier addict
05-30-2018, 09:23 PM
My first step would be to clean the IDC sensors

barber782
05-30-2018, 10:11 PM
Drums/devs haven't done their life yet. I even swapped out drums to see if it changed but nothing did.
Removed all lsu's and cleaned the glass.
Cleaned Id sensors that sit below transfer

Sent from my GT-I9195 using Tapatalk

allan
05-31-2018, 05:53 AM
Check the ends of the ribbon cables at the back. Reconnect connectors.

Custom Search