View Full Version : ricoh spc 420 dn printer
cypcopier
06-01-2018, 12:29 PM
hi mates,
how can be reset drum units transfer belt maintanence kits etc on ricoh spc 420
regards
blazebusiness
06-28-2018, 04:28 PM
hi mates,
how can be reset drum units transfer belt maintanence kits etc on ricoh spc 420
regards
It can't be reset in service mode. You would need reset chips to reset the replace drum counter or other parts on that unit. Even if you could find those chips (I've seen them sold on ebay) ....probably not worth it. Those drums go 50,000 copies and need to be replaced at that mileage interval for good color output. The transfer belt unit goes 100,000 pages and only costs about $160 to replace.
solorajder
07-08-2018, 07:08 PM
You can reset it in service menu.
Sent from my I9195I using Tapatalk
slimslob
07-08-2018, 10:05 PM
You can reset it in service menu.
Sent from my I9195I using Tapatalk
If so, then how. Step by step.
solorajder
07-09-2018, 04:12 AM
SP 7-804https://uploads.tapatalk-cdn.com/20180709/0739d7bd204426979f832f7f6bd31839.jpg
Sent from my I9195I using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.