View Full Version : C-4520 on pro 5501
mihaispita
06-07-2018, 07:04 PM
Hello
I have this problem on bizhub pro c5501
C-4520
Trimis de pe al meu SM-G950F folosind Tapatalk
Toxic
06-07-2018, 09:36 PM
Did you try this procedure?
1. "Service Mode Menu screen"
Press [01 Machine Adjustment].
2. "Machine Adjustment Menu screen"
Press [01 Printer Adjustment].
3. "Printer Adjustment Menu screen"
Press [10 Color Registration Adj.].
4. "Color Registration Adjustment screen"
Press [Start].
5. The color registration adjustment starts and a message "Completed" is shown in about 2 minutes.
If the error message appears, perform an error correction referring to the below.
• Error 1: It does not converge within the standard value.
The patch density may be too light. Check around the drum unit and perform the auto gamma
0. Then conduct this adjustment again.
• Error 2: The difference of the color registration is too much.
Check the installation position of the write unit.
• Error 3: Other
The other malfunction other than the auto color registration adjustment may occur. Restart the
main body in the normal mode to check for malfunction code.
clean the sensors ps8 & ps9 also the gamma sensor and check that the spring for the shutters over the sensors our working correctly, then run adj.
mihaispita
06-08-2018, 06:04 AM
I made the adjustments and give me a merror 2.
I also removed the sensors
Trimis de pe al meu SM-G950F folosind Tapatalk
clint@clintsimonsen.com
12-04-2018, 10:10 AM
With error 2 when they talk about the write unit are they do mean the imaging drum assembly? Or the laser unit
Sent from my ONEPLUS A6000 using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.