PDA

View Full Version : C3bo3. Konica Minolta. Bizhub 558e


Custom Search


brent
06-28-2018, 01:18 AM
900 copies. Brand new machine. This has codes out twice. The book said it was not receiving the signal
from the fuser yada. Has anyone corrected this with a new fusing section?
thank you so much
brent

antone
07-23-2018, 04:45 PM
Brent got the same error.....any fix for this problem?

Sent from my SM-N950U using Tapatalk

brent
07-23-2018, 05:29 PM
we reset it twice its working don't jinx me lol

I did download a new updated firmware for my next visit if it continues to fail

keep me in the loop as we need to figure out a positive fix for this werid code

brent

antone
07-23-2018, 05:45 PM
Thks alot....their a bulletin on Monica web site with something close to error! Power save mode ....turn it off......I guess I will see lol



..

Sent from my SM-N950U using Tapatalk

antone
10-02-2018, 11:32 PM
Firmware upgrade need ....will do the job......new one just came out

Sent from my SM-N950U using Tapatalk

Woxner
10-03-2018, 12:41 AM
install v1 firmware. this got triggered from a lampcode from the scanner if you look at the history on the print out you will see it.

KMFLT3CH
10-03-2018, 03:03 PM
There is a new bulletin for this C-3B03 code, see pdf below.

40765
40766

antone
10-12-2018, 05:41 PM
Upgrade to special firmware

Sent from my SM-N950U using Tapatalk

Custom Search