PDA

View Full Version : Quality fuser belt for Konica Minolta bizhub C451 C452 C550 C552 C650 C660


Custom Search


bocomin
06-29-2018, 04:25 PM
Hello, I'm having a problem with fuser belts for Konica Minolta bizhub C451 C452 C550 C552 C650 C660. The ones that i buy now crack after about 10 000 pages. I'm searching for a place where i can belts with better quality.

Pictures of the cracked fuser belts:
IMG 20180629 180316 — imgbb.com (https://ibb.co/frPBGd)
IMG 20180629 180356 — imgbb.com (https://ibb.co/fyGDUy)

Any help would be greatly appreciated.

Phil B.
06-29-2018, 07:30 PM
Hello, I'm having a problem with fuser belts for Konica Minolta bizhub C451 C452 C550 C552 C650 C660. The ones that i buy now crack after about 10 000 pages. I'm searching for a place where i can belts with better quality.

Pictures of the cracked fuser belts:
IMG 20180629 180316 — imgbb.com (https://ibb.co/frPBGd)
IMG 20180629 180356 — imgbb.com (https://ibb.co/fyGDUy)

Any help would be greatly appreciated.


sounds like you aren't buying OEM.

Synthohol
06-29-2018, 09:40 PM
yeah, OEM you get the whole fuser and a warranty ;)

bocomin
06-30-2018, 09:38 AM
Thanks for responce.


I'm not buying OEM, because there isn't one on sale. They are just selling the whole fuser. I need just the belt. I hope that there is compatible belt with better quality that the ones i bought.

Bix
07-02-2018, 10:18 AM
Where did you buy from? ;)

bocomin
07-02-2018, 03:14 PM
Where did you buy from? ;)

https://bit.ly/2MGMU7x (https://bit.ly/2MGMU7x)

Could you suggest better option except whole genuine fuser?

Phil B.
07-02-2018, 04:27 PM
https://bit.ly/2MGMU7x (https://bit.ly/2MGMU7x)

Could you suggest better option except whole genuine fuser?

1st this company has only been in business for 1 year ( per their website )

alot of the boards ect look to be PULLED parts ( I avoid them like the plague )

2nd Chinese company... list the parts ( films rollers ect ) as NEW but NOT OEM. OEM has strict manufacturing guide lines for the items... 3rd parties cannot formulate the same as OEM ( copyright infringement ) so they use cheaper products. cheaper products = headaches all the way around ( look at all the posts on 3rd party toners & drums )

are you an indy or dealer tech? if dealer have the boos get off his wallet!

bocomin
07-04-2018, 07:24 AM
Thanks Phil, It's not about the money i just can't find OEM supplier for this part.

copier addict
07-04-2018, 01:26 PM
Thanks Phil, It's not about the money i just can't find OEM supplier for this part.

I think you are kinda missing the point here. In purchasing an aftermarket fusing belt you are not going to get the quality of an OEM product, hence the issues you are experiencing with the cracking. Since KonMin doesn't sell the the belt separately, the whole fuser is the best option.

Blizzoo
07-04-2018, 07:45 PM
Hello, I'm having a problem with fuser belts for Konica Minolta bizhub C451 C452 C550 C552 C650 C660. The ones that i buy now crack after about 10 000 pages. I'm searching for a place where i can belts with better quality.

Pictures of the cracked fuser belts:
IMG 20180629 180316 — imgbb.com (https://ibb.co/frPBGd)
IMG 20180629 180356 — imgbb.com (https://ibb.co/fyGDUy)

Any help would be greatly appreciated.



If you still have unused belts I would try with a new sponge roller if it has done 2 cycles, the cracks looks to be caused by some squeezed ends of the sponge roller.

Synthohol
07-04-2018, 09:28 PM
KM is in Bulgaria.
KONICA MINOLTA Bulgaria (https://www.konicaminolta.com/bg-bg/)
(if sofia is in BG)
has to be a dealer or independent that can order you a whole fuser. no?

Custom Search