PDA

View Full Version : Problem BizHub C308


Custom Search


furius
07-10-2018, 11:19 AM
Hello ragas I would need a hand.
I have to replace the color drum units (313M-Y-C) on a BizHub C308.
I was sure that by mounting the black drum unit (313K) and changing the chip the machine would work without problems.
Instead, to my surprise, the car prints badly with p-21 error
What could be the problem?
The drums look identical except for the tab on the right side that I removed

JDR
07-10-2018, 01:02 PM
No they're not.
KM modified the front part (dunno how to say in English) of their color drums.
You have to take it back from the black one.

4005940060

furius
07-10-2018, 03:48 PM
Thank you so much
Could I take power from the old color drum and mount it on the drum k?

JDR
07-10-2018, 03:55 PM
You have to take this part (shown above) on the old color drum and mount it to the new black drum (transformed in color)

furius
07-10-2018, 04:07 PM
Great
Dear tomorrow I'll try from the customer and I'll let you know
Thank you so much again

avecosat
02-27-2019, 06:14 PM
Is it possible to do that ?

korthr5
02-27-2019, 06:46 PM
No they're not.
KM modified the front part (dunno how to say in English) of their color drums.
You have to take it back from the black one.

4005940060

Hello

Change the back and the front or only the front ? ( front near the blue handle )

Regards

JDR
03-04-2019, 08:32 AM
Only the front.

Custom Search