PDA

View Full Version : Jamming FS-534 j7216


Custom Search


pappyvonsillypants
07-10-2018, 02:29 PM
Hello, within 4 days of each other I have gone to 2 separate accounts with j7216 jams. On both occasions I have found that the hole punch pin on the finisher front side was bent as well as the entrance guide assy that the rubber rollers and pinch rollers rest in. Has any one else had these issues? Is there a bulletin I'm missing on the KM site? Am I just unlucky?

blackcat4866
07-11-2018, 12:53 AM
... Am I just unlucky?

Just unlucky I guess. Most of the finisher jams I see associated with the FS-534 are from the eject belt assy, or the regulating plates. Also watch out for the inlet mylars wearing through the fold, creating a loop of mylar to snag paper entering the finisher.

But thanks for sharing. I'll watch for it. =^..^=

Custom Search