PDA

View Full Version : C3350 alignment


Custom Search


tech51
07-11-2018, 05:21 PM
I have a c3350 where the long edge alignment (top to bottom) has gone out by about 15mm. I can adjust it back in service mode for single sided copying (glass & df) but for 2 to 2 through the df it’s still a long way out and can’t be corrected.

Has as anyone seen this before?

I’m going back tomorrow with a scanner, df & mfp board.

Your thoughts would be appreciated...

blackcat4866
07-11-2018, 05:34 PM
Could it be something as simple as paper tray guides broken or shifted or the rack gear missing teeth? =^..^=

tech51
07-11-2018, 06:25 PM
Could it be something as simple as paper tray guides broken or shifted or the rack gear missing teeth? =^..^=
No😉

Custom Search