IP-511

[philipx]

Ok here is my problem I have tryed to access the network using web Utilities which is sucssesful however the password is lost and the usual passwords
I have used to gain entry ie: 8 zeros or 3969 or 9272 is there any software to enable me to access the hard drive through the serial port to change this or has anyone got the setup software to reset the IP-511
I will have to clone the hard drive for saftey so no worries on giving me information I can at least try it.
I cannot network three workstations because of this and do require serious help
thank you in Advance I joined your forum today and it is looking great

[PeterG]

The default password is sysadm

[philipx]

ip-511

Yep I already tryed that one earlier today still no availI presed buttons 25 together it gave me the screen to change the four main passwords which were 0000 12345678 00000000 and 1234 to change admin password I could only enter in from web utilities so I entered into web utilities and put in sysadm it said password incorrect also entered on machine itself sysadm still says incorrect password thanks anyway but still have a problem

[pepper38_cnd]

Here is the reset procedure.

[pepper38_cnd]

The Hard Drive can be accessed by the serial port using TeraTerminal, system code can be easily restored this way ( if you know what you are doing ). The NIC information is contained in the NIC itself and has nothing to do with the Hard Drive.

[mingsen]

This is helpful, I manage to reset the password now.

Thanks a lot dude.