View Full Version : Konica bizhub C35 Toner Issue
copyguy69
08-02-2018, 09:23 PM
The black image unit needed to be replaced. It is in good shape so I just replaced the chip. Now machine is telling me that the black toner is missing. The image unit message is gone. Tried another toner but it did not work. Is there a reset to bypass the toner message? Thanks in advance.
copyguy69
JR2ALTA
08-02-2018, 09:30 PM
It could have a mangled crum sensor. i think it's just small copper contacts
allan
08-03-2018, 04:45 AM
Fun with after market chips. Change the K drum chip again....
It does weird things on these machines.
Keep an eye on the stats page for the remaining life some times the life resets partially.
Still worth the struggle. The iu's can be reset up to 3 times.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.