PDA

View Full Version : 4050 E301


Custom Search


Brett GS
08-06-2018, 07:23 PM
Hi all
Got a 4050 giving a E301 code.
The machine boots up and throws the code out in about 1 min after bootup.
Have loaded latest f/w and f/w for this code, formatted HDD, gives the code even with the network cable out.
Any ideas?

Brett

copyrooks
08-06-2018, 07:54 PM
Try a fax file format or intialize fax settings, Uninstall Fax unit

Try an initialization of network settings also after see if still happening.

Thats all I got

Phil B.
08-06-2018, 08:39 PM
Hi all
Got a 4050 giving a E301 code.
The machine boots up and throws the code out in about 1 min after bootup.
Have loaded latest f/w and f/w for this code, formatted HDD, gives the code even with the network cable out.
Any ideas?
Brett

what does the manual say is the cause of the error?

emujo2
08-06-2018, 09:08 PM
E301 is a general error code, it is very hard to diagnose the exact cause. Just about every firmware upgrade on these devices "fixes" a E301...I would go with firmware 1st. Is there anything else in the equation you haven't mentioned...some 3rd party authentication, advanced scanning ect?...Emujo

Synthohol
08-06-2018, 10:33 PM
do ALL of the firmware.
apply both controller and engine FW

Custom Search