PDA

View Full Version : C250 Network fax to PC


Custom Search


kennyoleary
09-25-2008, 09:30 PM
Can the C250 recieve a fax from another type of fax machine and turn it into a file or email and send it to a PC on the network? I have looked thru the Network Fax Operation Guide and it refers to IP Adress faxing and Internet fax but I don't see how either one of these puts the fax on the PC.

pepper38_cnd
09-25-2008, 10:41 PM
Forward TX can be to anything in the address book, forward faxes to Email, SMB, Box, FTP or another fax number.

kmcopytech
09-26-2008, 01:29 PM
Gateway TX is not enabled. To enable Gateway TX, perform the following:

1\Enter Utility--administrator setting;

2\select fax setting--forward TX setting;

3\Don't choose OFF.

Good Luck!!!

pepper38_cnd
09-26-2008, 01:56 PM
Don't get confused, the instructions I attached earlier are correct (copied directly from the Users Guide), this is a C250 not a Bizhub 250. Gateway TX does not apply.

konisolver
09-26-2008, 03:08 PM
Yes you can forward faxes to electronic format. If you want to forward as pdf and not tiff make sure you have the latest firmware levels.

konisolver
09-26-2008, 03:08 PM
Yes, you can forward faxes to electronic format. If you want to forward as pdf and not tiff make sure you have the latest firmware levels.

kennyoleary
09-26-2008, 05:38 PM
Thanks for the help. I am updating the firmware today.

kmcopytech
09-27-2008, 04:11 AM
Don't get confused, the instructions I attached earlier are correct (copied directly from the Users Guide), this is a C250 not a Bizhub 250. Gateway TX does not apply.


Thank you for your correction!


I was confused,
but I should say that the setting is correct!!!

Custom Search