PDA

View Full Version : C3350 Light/Faded print all colors


Custom Search


BluaboardTwice
08-22-2018, 02:47 PM
All the Imaging units are within range and good on life transfer belt checks out good as well. I did and initialization and stabilization. Cleaned off the printheads receded all Imaging units and transfer belts unplugged unit from wall and power cycle. I had this problem before but it lingered on and I was not the one who fixed it in the end and don't remember what the fix was

tech51
08-22-2018, 06:23 PM
A picture would be nice! But otherwise HV or drive unit.

Downunder
08-24-2018, 02:26 AM
check all you contacts around transfer area. There was a bulletin about this. You need to reform one of the silver contacts. Even though the meters indicate life left not always the case.

Custom Search