PDA

View Full Version : Bizhub 222 replacement digitizer/touchscreen


Custom Search


Gift
08-23-2018, 10:14 AM
hello there,

anyone knows if the 3rd party digitizer screens wich are widely available for Bizhub 250 will fit for a bizhub 222 as well?
Some vendors list these as universal for bizhub 250 AND xx2 but most are just listed for bizhub 250/350 series ONLY so
I don't feel confident enough right now for trial and error^^

thx

copyman
08-23-2018, 12:43 PM
See below. Not sure why my posts keep repeating.

copyman
08-23-2018, 12:57 PM
Good question. I just looked at a touch screen I still have and it only lists Biz 200/250/350/2510/3510. Now that I think about it touch screen may be different because I don't remember changing on the 222 series back when I was working on a lot of these. I changed many on the Biz 250 series. I would guess they are the same and reason not listed is the 222 series had the new style screen that didn't go bad as often. The old style ribbon cable on screen would come loose from the heat.

Gift
08-23-2018, 01:33 PM
Our case might end up at my sales guy trying to sell a new mfp^^

Gift
08-30-2018, 09:49 AM
We ended up trying it and to make a long story short: The 3rd party digitizer for the BH250 fits 100%, yay!!!

jotunn
08-31-2018, 04:16 PM
Why don't you repair them, instead replacement...

Custom Search