View Full Version : Bizhub 283
liondor1969
08-23-2018, 02:42 PM
Hallo
i buy today a used bizhub 283..only black,is posible too use black color toner from c8000 to refil my bizhub 283 ? I have in studio a new Acurio Print C2060L..is posible to refil bizhub with black toner from my C2060L ?
Thanks
Toxic
08-23-2018, 02:49 PM
Not even close to match that but you can try,i am curious about results...
allan
08-23-2018, 05:42 PM
Do it just do it.
copier tech
08-23-2018, 06:04 PM
Yeah do it I dare you!
Post a print sample after for us to laugh at!
Phil B.
08-23-2018, 06:29 PM
Hallo i buy today a used bizhub 283..only black,is posible too use black color toner from c8000 to refil my bizhub 283 ? I have in studio a new Acurio Print C2060L..is posible to refil bizhub with black toner from my C2060L ?
Thanks
sure you can...
how big is your checking account?
you will be paying for new drums/devs/fusers.
the toner formulas ARE NOT EVEN CLOSE!
BUT IF YOU WANNA DO IT.... DO IT!
Synthohol
08-23-2018, 09:59 PM
since we are on the subject, my car uses gas but the station around the corner sells diesel cheaper, thats the same right? i should have no problems substituting since fuel is fuel amiright? amiright?
oy vey...
Downunder
08-24-2018, 02:22 AM
And after you have tried that, why don't you put diesel in your petrol car or vice versa...
allan
08-24-2018, 05:11 AM
No really it could work....
The worst that can happen is a dev replacement.
Would be nice and shiny prints.
If it gets past the drum, the fuser temp should be dropped.
liondor1969
08-24-2018, 05:24 AM
I do not want to do experiments, I wonder if anyone has done this and if black toner is compatible ;)at 6500 I reloaded toner from c8000 and I worked a few years with him without any problems.
Tx
allan
08-24-2018, 05:30 AM
It would be experimental. We don't have the time or energy to play with this.
That is why we would like to know the outcome to this.
What i do know it that B250, B282 toner will work ok.
copyman
08-24-2018, 01:25 PM
WHY? .............you can buy this toner so cheap. Aftermarket is like $10 !!!!
3ktlc
08-24-2018, 02:09 PM
Why take that chance? Could cost way more in the long run. Have found compatible toner that is acceptable for this machine.
jeffreyclay
08-25-2018, 02:27 PM
I do not want to do experiments, I wonder if anyone has done this and if black toner is compatible ;)at 6500 I reloaded toner from c8000 and I worked a few years with him without any problems.
Tx
Why would you even want to try this? Does customer have a closet full of other toner? Not worth the risk, just use the correct supplies!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.