PDA

View Full Version : Konica Minolta C652 PRCB Firmware Name


Custom Search


mindhunter
08-26-2018, 09:10 AM
In the manual service I read that Update PRCB Firmware.

does anybody know the name of Firmware ?

thanks

copier tech
08-26-2018, 10:28 AM
Basically you just load the mass production firmware & this will update the Printer Control Board firmware, this is usually needed to be done if you have replaced the PRCB.

Unless you have a issue there are special firmware versions available that address specific faults etc.

mindhunter
08-28-2018, 07:43 AM
Basically you just load the mass production firmware & this will update the Printer Control Board firmware, this is usually needed to be done if you have replaced the PRCB.

Unless you have a issue there are special firmware versions available that address specific faults etc.

Is there any special Firmware version available for PRCB faults ?

Custom Search