View Full Version : Konica Minolta C652 PRCB Firmware Name
mindhunter
08-26-2018, 09:10 AM
In the manual service I read that Update PRCB Firmware.
does anybody know the name of Firmware ?
thanks
copier tech
08-26-2018, 10:28 AM
Basically you just load the mass production firmware & this will update the Printer Control Board firmware, this is usually needed to be done if you have replaced the PRCB.
Unless you have a issue there are special firmware versions available that address specific faults etc.
mindhunter
08-28-2018, 07:43 AM
Basically you just load the mass production firmware & this will update the Printer Control Board firmware, this is usually needed to be done if you have replaced the PRCB.
Unless you have a issue there are special firmware versions available that address specific faults etc.
Is there any special Firmware version available for PRCB faults ?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.