biz 501

[Gab]

In this machine previous service replaced developer before 50k copies (only developer) . fter 50k copies i replaced drum , executed drum counter clear . It worked fine for about a week and then when they turn on machine have some image problems. Solid dark line at one side then after some copies at some lines image is more intense . And after some copies image is ok and remains ok till next day.
Any ideaa where the problem is?

[Gab]

In this machine previous service replaced developer before 50k copies (only developer) . fter 50k copies i replaced drum , executed drum counter clear . It worked fine for about a week and then when they turn on machine have some image problems. Solid dark line at one side then after some copies at some lines image is more intense . And after some copies image is ok and remains ok till next day.
Any ideaa where the problem is?

Sorry, machine is 362 also the same image for copinyg and printing

[Gab]

Sorry, machine is 362 also the same image for copinyg and printing
sorry , sorry again , machine is 360

[Toxic]

Did you check/clean/replace charge corona?
After that check drum,cleaning blade,developing roller...
It make sense to follow procedure and replace drum,developer,corona... together.