View Full Version : Error Code Insert the correct Imaging Unit
Babangida
10-05-2018, 06:21 AM
Hello everyone. I have Konica Minolta CF2002 that says Insert Correct Imaging Unit and close the door. I bought the IU chips several times from different vendors but non worked. I read somewhere that it is the firmware I need to upgrade. I dont even know what or where the firmware is or how to upgrade it. Any help on how to come about this will be highly appreciated. Thanks
Hi,
you can download the FW from the KM's website. You need the access as technician
Babangida
10-05-2018, 11:47 PM
Hi,
you can download the FW from the KM's website. You need the access as technician
Thank you so much. As I am not a technician, i doubt if i will be granted access. there may be another way. I pray that someone in this forum might have come across this or similar problem in the past that will kindly share his solution with me. Thank you as i patiently wait for guidance.
Synthohol
10-06-2018, 04:09 AM
not to be a wise ass but you could try an OEM IU?
Toxic
10-07-2018, 08:28 PM
I dont think firmware will resolve your problem.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.