View Full Version : Bizhub 1052
copytechman
10-17-2018, 09:17 PM
Separate issue, i'll be looking through dip sw settings however does anyone know if theres a setting to turn on offsetting/shifting of jobs on a fs612 on a bizhub 1052? It won't offset either in copy or print no matter what.
Thanks for any help!
A!
jotunn
10-17-2018, 10:20 PM
Maybe it's not working as you wish, just because it is not a finisher for this machine?
blackcat4866
10-17-2018, 10:52 PM
Maybe it's not working as you wish, just because it is not a finisher for this machine?
Like he said, per the brochure, it's not a compatible accessory:
https://www.biz.konicaminolta.com/production/1250_1052/pdf/bizhub_press1250_1052.pdf
=^..^=
copytechman
10-18-2018, 02:03 AM
Apparently you are correct it must be the fs532 (if I read that correctly) my error. Fs612 might be the finisher for the c3070L but I may not be correct there either.
Regards!
A.
blackcat4866
10-18-2018, 02:07 AM
Apparently you are correct it must be the fs532 (if I read that correctly) my error. Fs612 might be the finisher for the c3070L but I may not be correct there either.
Regards!
A.
Nope. The FS-612 mated to the bizhub C6000. =^..^=
copytechman
10-18-2018, 03:07 AM
Well that's fine it's the 1052 I'm interested in regardless. As clueless as I apparently sound atm tho!
A!
blackcat4866
10-19-2018, 03:36 PM
The offset mechanism is very reliable. I've had a few apart just because it was in the way of something else. I suggest that you do a little exploratory surgery.
Take it apart ... observe. =^..^=
REGSIS
10-19-2018, 04:34 PM
Nope. The FS-612 mated to the bizhub C6000. =^..^=
and C1060L
copytechman
10-19-2018, 08:44 PM
Not necessary to explore further it's a setting in Admin settings that turns that feature on. Go figure!
Thx!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.