PDA

View Full Version : Problem with BHC 454


Custom Search


myster
11-21-2018, 05:26 PM
When printing the paper rubs with these parts of the fuser and the strip producing friction in the image
411084110941107

Thanks Gracias

Synthohol
11-21-2018, 10:23 PM
try checking/adjusting Fuser Transport speed under Machine in tech rep

myster
11-23-2018, 09:02 AM
try checking/adjusting Fuser Transport speed under Machine in tech rep


Si eso es lo que he modificado, tambien he eliminado la guia negra de la banda de transferencia, y parece que funciona.
Aun asi no creo que esa sea la solución correcta, estoy pendiente de lo que me diga el cliente
Gracias

If that's what I modified, I've also eliminated the black guide from the transfer band, and it seems to work.
Even so, I do not think that is the right solution, I am aware of what the client tells me.


Thanks!!

allan
11-23-2018, 12:37 PM
On thick stock even the roller marks remain on the prints with this model.

mincopier
11-23-2018, 01:47 PM
It's either fuser speed or the fuser itself may have a problem allowing the paper to slip and not be pulled fast enough.

Custom Search