bula02
11-22-2018, 08:28 PM
Hi,
I have a problem with my KM C6500, since last week i have a vertical magenta and cyan lines for about 225mm long. After dirty lines the print is clean for about 400mm and after this it's dirty again (clean->dirty->clean->dirty->clean...).
Do you have anu idea whats wrong?
Photo
https://wdruk.pl/wp-content/uploads/2018/11/IMG_20181122_202656_min.jpg
(https://wdruk.pl/wp-content/uploads/2018/11/IMG_20181122_202656_min.jpg)
Krystian
I have a problem with my KM C6500, since last week i have a vertical magenta and cyan lines for about 225mm long. After dirty lines the print is clean for about 400mm and after this it's dirty again (clean->dirty->clean->dirty->clean...).
Do you have anu idea whats wrong?
Photo
https://wdruk.pl/wp-content/uploads/2018/11/IMG_20181122_202656_min.jpg
(https://wdruk.pl/wp-content/uploads/2018/11/IMG_20181122_202656_min.jpg)
Krystian