View Full Version : bizhub 223 QUESTION
LASSSEN
11-24-2018, 10:49 PM
Hello
I'd like to if it is possible to copy a firmware from the copier using the usb flash
thank you in advence
Synthohol
11-25-2018, 12:39 AM
yes however you leave the .tar file as is, the copier will decompress it itself.
wait, you want to copy FW FROM the copier to a USB? no thats a negative.
blackcat4866
11-25-2018, 01:50 AM
yes however you leave the .tar file as is, the copier will decompress it itself.
wait, you want to copy FW FROM the copier to a USB? no thats a negative.
You may not copy the firmware from a functioning machine. It is not possible. That goes for all manufacturers, all models AFAIK. =^..^=
Phil B.
11-25-2018, 02:09 AM
Hello
I'd like to if it is possible to copy a firmware from the copier using the usb flash
thank you in advance
nope ... one way operation only
haven't met a brand of O.E. that is possible on... and I've serviced just about all of the big ones.. ( not many rebrands )
copyman
11-25-2018, 02:21 AM
All correct answers but no one asked, why would you need or want to ?
LASSSEN
11-25-2018, 11:49 AM
thanks all for answers, I want do it because I is difficult to have it, and if someone can send it to me, here is my email
lah.mosaidgmail.com
copyman
11-25-2018, 02:53 PM
I tried to send it and the email you provided is not a valid email address! This is why I hate to do people favors !!
LASSSEN
11-25-2018, 03:18 PM
thank you very much
my email adress : lah.mosaid@gmail.com
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.