PDA

View Full Version : Miscellaneous Password after replace Drum on Bizhub 283


Custom Search


kazihaha
11-28-2018, 04:27 AM
I just doing with Konica, the bizhub 283 need password after replaced Drum Unit, I already try 92729272, 00000000, 12345678 but nothing work, the old suplier ask me bring the board to flash the firmware ... 50$ :((
Could someone help me?
There the tool NVRam resetting?
My email: kazihaha@yahoo.com
Thanks so much.

Phil B.
11-28-2018, 06:47 AM
I just doing with Toshiba, the bizhub 283 need password after replaced Drum Unit, I already try 92729272, 00000000, 12345678 but nothing work, the old suplier ask me bring the board to flash the firmware ... 50$ :((
Could someone help me?
There the tool NVRam resetting?
My email: kazihaha@yahoo.com
Thanks so much.

RTFM

or GTFM

kazihaha
11-28-2018, 08:40 AM
RTFM

or GTFM

Sorry what's that? I'm new to Konica

tsbservice
11-28-2018, 10:37 AM
First get at least Service Manual, read it, then ask Questions.
Means that original password was changed and with OR without Manual you has to ask those who sell you machine for it.
There is a chance if you donate here somebody send you Firmware.

Synthohol
11-28-2018, 12:26 PM
the drum unit automatically rests the counter and you can do the gradations through admin mode.

copier addict
11-28-2018, 01:39 PM
the drum unit automatically rests the counter and you can do the gradations through admin mode.

Counters have to be reset manually on the BH283. Also so have to run TCR adjustment in service mode. Without service password these steps can't be done.

Phil B.
11-28-2018, 05:01 PM
Sorry what's that? I'm new to Konica

RTFM = Read The F'ing Manual

GTFM = Get The F'ing Manual

Synthohol
11-28-2018, 06:23 PM
Counters have to be reset manually on the BH283. Also so have to run TCR adjustment in service mode. Without service password these steps can't be done.

Aw man, sorry about the bad info, I've worked on so many 4 5 7 8 and 9 series I totally forgot the legacy machines.
Also I hope the developer was changes too or you will likely get 255x codes. Both drum and dv are replaced as a set.

blackcat4866
11-28-2018, 11:20 PM
You have to 1) get the CE password or 2) reset the CE password:

1) contact the genius who changed it.
2) place a hotline call, and provide the 20 digit reset code. KM then provides you with a 20 digit code to enter, to reset the CE password to it's default.

Those are your only two choices. =^..^=

kazihaha
12-04-2018, 04:31 AM
You have to 1) get the CE password or 2) reset the CE password:

1) contact the genius who changed it.
2) place a hotline call, and provide the 20 digit reset code. KM then provides you with a 20 digit code to enter, to reset the CE password to it's default.

Those are your only two choices. =^..^=

The one who change the password is technician of Master Dealer here, they do not want their customer have other supplier.
How much does it cost for Password crack? If I donate 10$, is it OK?

rrrohan
12-04-2018, 05:12 AM
You can glitch past the CE password screen. I haven't done it in 4 years so might of been patched

Custom Search