PDA

View Full Version : Bizhub C360 Random Hang up on Logo


Custom Search


inutelkamo
12-04-2018, 05:38 AM
Hi,

Random hang up on Logo during:
1.) Morning Power On,
2.) Wake up after Sleep( if no hang up on power on)

I did:

Replace MFPB
Replace Memory Module
Replace HDD
Update Firmware
and Lastly, Install new SSD/NVram

Any thoughts??

allan
12-04-2018, 11:12 AM
Does this happen with the network cable unplugged?

inutelkamo
12-05-2018, 12:59 AM
Does this happen with the network cable unplugged?

Nope Buddy, Network cable was unplugged.

rrrohan
12-05-2018, 04:10 AM
Do the cooling fans start up

Woxner
12-05-2018, 04:16 AM
try power supply. 24v may not be kicking in

inutelkamo
12-05-2018, 05:19 AM
Do the cooling fans start up

Cooling fan on MFPB? yep! it starts up! then shuts off few seconds after planet logo appears..

inutelkamo
12-05-2018, 05:20 AM
try power supply. 24v may not be kicking in

Thanks Buddy!

Will do test on power supply. Already checked for bloated capacitors but there is none. Already requested brand new power supply to test it.

rrrohan
12-05-2018, 05:23 AM
Planets? You mean hour glass? If you got planets almost sounds like firmware on new board did not take

inutelkamo
12-05-2018, 05:29 AM
Planets? You mean hour glass? If you got planets almost sounds like firmware on new board did not take

Planets, After the hour glass.

Already did FW update, and new MFPB installed, with new SSD/NVRAM.

And its random hang up..
for example yesterday, whole day it did hang up and cannot be use,
today, it can be use, all functions.

What confuses me is the random hang up..

Custom Search