PDA

View Full Version : C227 with error code C5501.


Custom Search


barber782
12-07-2018, 09:40 AM
Hi everyone,

Got a c227 machine displaying an error of C5501, which is related to the fuser unit and voltage supply.
So far iv updated firmware, replaced fuser unit, replaced mfp board. Checked power supply board with multi meter.

Still having the same problem. Any suggestions would be great. Really hate this model.



Sent from my GT-I9195 using Tapatalk

allan
12-07-2018, 02:02 PM
Dumb question. Did you reset the error?

BarryJ
05-12-2022, 11:24 AM
Hi everyone,

Got a c227 machine displaying an error of C5501, which is related to the fuser unit and voltage supply.
So far iv updated firmware, replaced fuser unit, replaced mfp board. Checked power supply board with multi meter.

Still having the same problem. Any suggestions would be great. Really hate this model.



Sent from my GT-I9195 using Tapatalk


ANY SOLUTION to this?

kirin
05-12-2022, 01:07 PM
Hi, same code in C220, same procedure, but still the same code , finally another power pcb fixed the problem.

Custom Search