PDA

View Full Version : How to disable Fiery on Bizhub C454e


Custom Search


SAR
01-02-2019, 02:40 PM
We got a used machine in with a Fiery attached that we want to resell with the Fiery removed. Are there any settings that need to be changed, Dip Switch changes etc? I have no experience with the Fiery units, so sorry for the lack of knowledge.
Thanks!

allan
01-02-2019, 03:51 PM
Need to set it to controller "0" in service mode under <image controller>.
Its under <system 2>.

Jip best to just remove them...

emujo2
01-03-2019, 05:24 PM
You should also remove the SCSI board after disabling the Fiery. You may have some open holes on the rear panels. E

Custom Search