PDA

View Full Version : Miscellaneous FS533 Finisher


Custom Search


jwai
01-21-2019, 02:00 PM
Hello,

The old version FS533( for C364e ) can install and work properly on C368?

copier addict
01-21-2019, 02:24 PM
Hello,

The old version FS533( for C364e ) can install and work properly on C368?

It lists both series in the installation manual. So I would say yes.

jwai
01-21-2019, 03:08 PM
It lists both series in the installation manual. So I would say yes.

Coz I check the part number is a bit different, the last number is 1 for the old version and 2 for C368.

copyman
01-21-2019, 04:28 PM
The last 2 digits of Kon/Min part #'s is the updated version. As the option or part is modified / updated during several years those last 2 digits will change. I've seen some of those last 2 numbers change 10+ in some cases. Especially with the options that Kon/Min like to use for several years with different machines.

Example: 9332 1500 "12" means this clutch has been updated 12 times!

So to answer your question yes you can use it. As long as the first digits are the same. Plus like the other poster said it lists the C368 on the install instructions.

Bix
01-21-2019, 04:35 PM
Hello,

I confirm. I use FS-533 without problem with compatiblity

jwai
01-22-2019, 12:30 PM
Thank you very much !!!

jwai
02-28-2019, 02:34 PM
Since my experience is , the fax unit for bizhub 215 is A4M2041, and A4M2042 for 226.
I tried to install #042 to 215 however it displayed error message and the machine freeze.

REGSIS
02-28-2019, 05:25 PM
Hello,

The old version FS533( for C364e ) can install and work properly on C368?

I use it for 4 and 8 series moving from one machine to another without any trouble. It's official!

As I mention on another thread, you can use DF-629 on 4 series, and DF-624 on 8 series. It's not official but it works without any problem.
Power connector should be modified but it's easy job.

jwai
03-01-2019, 05:01 PM
I use it for 4 and 8 series moving from one machine to another without any trouble. It's official!

As I mention on another thread, you can use DF-629 on 4 series, and DF-624 on 8 series. It's not official but it works without any problem.
Power connector should be modified but it's easy job.


Wooo...fantastic!

Custom Search