View Full Version : Di1811 duplex Problem
I have a Di1811 basically the same as a 183. When I duplex a copy it prints the first side fine, but the second side is really light. Any suggestions on how to fix this? Thanks.
alexxcopier
10-03-2008, 06:13 PM
Change transfer roller
I've done that but thanks anyway. Any more ideas?
kmcopytech
10-06-2008, 05:41 AM
This is a separation or transfer problems:
1、Try to replace paper;
2、Change transfer/separation unit;
redime
10-06-2008, 12:30 PM
This is a separation or transfer problems:
1、Try to replace paper;
2、Change transfer/separation unit;
I remember the first time I was having problems with something similar, and one of our techs told me to try replacing the paper. I almost laughed out loud when he said this, I go back there with a new ream of our paper and sure enough everything was fine.
Closer inspection on the paper was it was damp - they had a case of paper sitting on a concrete floor, these were the two reams sitting on the very bottom of the box. :eek:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.