PDA

View Full Version : Job Settings Timeout limit BH C451 and up?


Custom Search


Synaux
02-13-2019, 04:45 AM
I swear there was a setting to extend the job-settings timeout...

Explanation:
Let's say you change any setting in a copy job: half-fold/tri-fold/duplex/staple/etc it reverts to default job settings after a short time (scans too but obviously different settings).

I was certain there was a setting to extend this; however, on a handful of models in these series (c45xx), I went through all the user/admin/SM settings a few times over and did not see anything relevant.

So yeah... Am I crazy or....

Thanks

907tec
02-13-2019, 08:34 PM
Have you checked Admin / System / Reset Settings? If you have the User Guide Copy Operations, it's in section 11-38 / p.699.

Synaux
02-13-2019, 11:55 PM
Have you checked Admin / System / Reset Settings? If you have the User Guide Copy Operations, it's in section 11-38 / p.699.

Oh boy...I read that as something totally different.
I knew it was going to be something so simple I almost didn't even want to ask the question.

Thanks man, I was beginning to think I was losing my mind!

907tec
02-14-2019, 12:01 AM
No prob, happy to help.

Woxner
02-14-2019, 01:06 AM
i think what you are after is accessabillity tab. panel setting are there

Custom Search