PDA

View Full Version : C35 scanner unit replacement


Custom Search


copier tech
02-19-2019, 02:47 PM
Hi all,

I have to replace a broken glass/scanner unit on this old little machine, any tips & time scale to allow!?

avecosat
02-19-2019, 06:07 PM
I have changed many units and it is very simple, I have even exchanged with the bh36. Are you going to change the unit or just the belt?

copier tech
02-19-2019, 06:18 PM
I have changed many units and it is very simple, I have even exchanged with the bh36. Are you going to change the unit or just the belt?

Complete scanner ass'y, my colleague has removed one from a scrap machine & is shipping it out to me!

Albonline
02-19-2019, 07:56 PM
be careful of pinching wires during reassembly, this is the most common problem i see.

srvctec
02-19-2019, 08:06 PM
Replacing the whole scanner unit is pretty easy. Just make sure to route the ribbon cables through the appropriate ferrite cores and as mentioned above, be careful of pinched wires. I've done the swap a few times and it shouldn't take much more than an hour or so to remove the old one and put in the replacement.

Custom Search