PDA

View Full Version : KM Bizhub pro 951 pausing during runs


Custom Search


JVC
02-19-2019, 09:53 PM
Hello

We have just placed a rebuilt 951 at one of my customers and during large runs it seem to pause for up to 5 minutes at a time. Does anyone have any thoughts on why this may be happening? We placed two and the other one does not have this issue. Thank you in advance for any and all help.

Joe

tech51
02-19-2019, 10:15 PM
Try swapping the fusers over between the two machines and see if the fault transfers. You may have a faulty heater lamp.

blackcat4866
02-20-2019, 12:41 AM
Do you get "Now correcting." message boxes? =^..^=

DigiMan
02-23-2019, 10:45 AM
If memory serves there was a setting like "Fuser Pre-rotation" or something in the common settings which caused it to give large pauses between jobs to "avoid" damage in the fuser.

allan
02-23-2019, 12:06 PM
At about 5Mil the fuser lamps gets too weak. They deteriorate and cause that trouble.
Replace the lamps.

Custom Search