View Full Version : Konica Minolta bizhub C1085 & Pro1100 maintenance/parts replacement schedule
davidj7
02-20-2019, 01:57 PM
Hi,
I am looking for the maintenance /parts replacement schedule of Konica Minolta bizhub C1085 and Pro1100 something like Xerox HFSI list .Like part A has to be replaced after 100000 A4 prints etc.
Please P.M me if you can share.
many thanks
David
allan
02-20-2019, 02:39 PM
Its part of the service manuals and even the parts manual.
davidj7
02-20-2019, 06:10 PM
So I need to have the full service and parts manual and not just few pages?
allan
02-20-2019, 06:27 PM
Unless someone will give you a cost calculation spreadsheet with all the info.
davidj7
02-20-2019, 06:31 PM
Unless someone will give you a cost calculation spreadsheet with all the info.
Thanks for the info
allan
02-20-2019, 06:51 PM
From a service point of view the 1100 is an awesome machine.
Very easy to get around.
Its a real machine not a toy.
blackcat4866
02-20-2019, 11:38 PM
If you're going to install those maintenance parts you're probably going to need the service manual to run the simulations. Or is this just speculation about possibly buying parts? =^..^=
wjurls
03-06-2019, 09:07 PM
I would not even consider touching a C1085, or C1100 (Or any production color machine) without a service manual at your disposal. There are many procedures that are critical to carry out following component replacements.
Lee
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.