PDA

View Full Version : Bizhub 552 scanning to server 2016


Custom Search


afterhours
02-26-2019, 04:57 PM
Hello everyone. Quick question.

Is there special firmware for a bizhub 552 and c552 to scan to server 2016?

If so, which one is it?


Thank you for your help!

allan
02-26-2019, 06:05 PM
Why not use FTP?

afterhours
02-26-2019, 06:27 PM
Why not use FTP?
The customer prefers SMB

Woxner
02-26-2019, 07:15 PM
then update to the latese base the special. see if it works

Synthohol
02-26-2019, 07:46 PM
That old machine does not support smb v2. Or ntlm v2.
Either use ftp or setup scanning on an old xp or 7 box.

It's a security risk but you can enable smb 1 or ntlm v1 on the server?

Maybe they can get a machine from this era?
The technology of the server OS has surpassed the copiers capabilities.
Not your fault. Nobody told them it was ok to upgrade a server with old ass copiers.

allan
02-26-2019, 08:39 PM
Or use a linux box. Old dual core will do. Raspberry Pi glued to the side of the server.:rolleyes:
Just kidding.

rrrohan
02-27-2019, 04:27 AM
It's a security risk but you can enable smb 1 or ntlm v1 on the server?

.

IT will kill you for doing this

copier tech
02-27-2019, 06:27 AM
IT will kill you for doing this

Check with IT is this is OK to do, if they say no expain the C552 is no longer supported & explain their options.

Simplist option is to add a NAS drive or Win 7/10 PC to the network.

allan
02-27-2019, 07:16 AM
Check with IT is this is OK to do, if they say no expain the C552 is no longer supported & explain their options.

Simplist option is to add a NAS drive or Win 7/10 PC to the network.

Did not even think about a NAS that could be a great option.
Never tried but do you think FTPS can be setup?

Custom Search