PDA

View Full Version : network stting does not show in administrator seeting


Custom Search


Gulbadin
03-12-2019, 02:03 PM
i was using bizhub 600 as a printer but after turning off dhcp the network setting does not show any more so i cant connect to it from pc.

allan
03-12-2019, 03:24 PM
Any message on the panel that shows something like ARP request?
Unplug the LAN cable and give the machine a good 10 to 20 min after restart to see if you can access it.
Could be that a network speed selection issue.

alamsandhu
03-13-2019, 06:44 PM
i was using bizhub 600 as a printer but after turning off dhcp the network setting does not show any more so i cant connect to it from pc.

need to replace/restore the CF card..
the controller is connected in the machine ?

Synthohol
03-13-2019, 06:54 PM
print the config page?
- Press the Utility/Counter button.
- On the touch screen, select User Setting.
- Select Printer Setting.
- Select Print Reports.
- Select Configuration Page.
- Select the paper tray to print from (if prompted).
- Press the Start button.

Custom Search