PDA

View Full Version : Sc95-01 sc80-01 bizhub 1050 fixed


Custom Search


pudgi300
03-21-2019, 02:54 PM
Just a little tip if someone has a BIZHUB 1050 with SC95-01 and SC80-02 when going to service mode. Machine would go to Ready To Copy but fail with J17-02 then throw SC95-01. After replacing prcb,oacb,accb and both adu boards. Seemed to be a dead end. What fixed the machine was replacing the ADU Connecting wire Assmy that had broken wires. p/n 56ua90210. Hope this helps someone.

SORRY SC80-01 should be SC80-02

blackcat4866
03-21-2019, 03:23 PM
Good catch! It take a lot of opening and closing of the drawer to wear through those wires. =^..^=

Custom Search