PDA

View Full Version : Bizhub 4050 CE password


Custom Search


nathicana
04-02-2019, 12:43 AM
Can someone help me get into service mode? It asks for CE password and now says "locked after failed attempts" because I kept trying the wrong password.

Is there a way to clear that and what is the CE password?

nathicana
04-02-2019, 01:12 AM
I got in by stop 09317 then 92729272

I can't find logical format though in state confirmation

Is there a way to logical format on a Bizhub 4050?

blackcat4866
04-02-2019, 01:41 AM
Does it have a HDD? =^..^=

nathicana
04-02-2019, 04:00 PM
Does it have a HDD? =^..^=

Yes I can see that it has an HDD but not where to do the logical format.

I need to overwrite the hard drive and get a data report to print out.

On other Konica Minolta machines the hard drive needs to be formatted following the overwrite.

blazebusiness
04-02-2019, 04:10 PM
Yes I can see that it has an HDD but not where to do the logical format.

I need to overwrite the hard drive and get a data report to print out.

On other Konica Minolta machines the hard drive needs to be formatted following the overwrite.

This is not really a Konica, it's a relabled Lexmark. You will find what you are looking for in the Utility-----Settings menu under HDD Settings. The table supposedly looks like this:

Administrator Settings - Security Settings
HDD Settings--Check HDD Capacity
Overwrite All Data--HDD Overwrite Method---Execute
HDD Format
HDD Encryption Setting
Overwrite HDD Data

Not sure about how you can get that Data report to print out though, maybe somebody else here can answer that for you.

Bix
04-02-2019, 04:26 PM
[QUOTE = nathicana; 744301] Qualcuno può aiutarmi ad entrare in modalità di servizio? Richiede la password CE e ora dice "bloccato dopo tentativi falliti" perché ho continuato a provare la password sbagliata.

C'è un modo per eliminarlo e qual è la password CE? [/ QUOTE]

hello, if you are wrong more than three times:
1. turn off on.
2. counter > keypad > stop > 0 9 3 1 7
3. wait 5-10 minutes.

nathicana
04-02-2019, 04:38 PM
This is not really a Konica, it's a relabled Lexmark. You will find what you are looking for in the Utility-----Settings menu under HDD Settings. The table supposedly looks like this:

Administrator Settings - Security Settings
HDD Settings--Check HDD Capacity
Overwrite All Data--HDD Overwrite Method---Execute
HDD Format
HDD Encryption Setting
Overwrite HDD Data

Not sure about how you can get that Data report to print out though, maybe somebody else here can answer that for you.

Maybe there is not a report

Thank you

Custom Search