PDA

View Full Version : Minolta Di550/EDH-3


Custom Search


mattwill1107
10-07-2008, 04:32 PM
The EDH-3 doc feeder parts manual, in the paper take-up section (c), shows a frame type piece that holds the photo sensors, such as PC8, PC9 and actuators. This frame piece does not show a part number, and we have one that is cracked. Does anyone happen to know this part number? I have attached a copy of the page from the edh-3 parts manual.

ni311
10-07-2008, 08:36 PM
Bad news, it seems that is a KM error. This manual has only one version (V1.0.0 from the year 2000 or something), it is only in English and obviously contains this mistake.

cobiray
10-07-2008, 10:20 PM
I think somethings got lost in the merger awhile back. I'm pretty sure that there were more than 11 bulletins for the di450 and more that 2 updates for the EDH-3. There were mylars to put on and a revised drive motor bulletin and the machine had one for cleaning the conductive grease off of the bias contacts for the mag roller which caused dumping. All three of those are curiously missing. I'd submit a request for the part number.

mtech
10-08-2008, 03:28 AM
The part number for that guide is 4641-3402-15.

mattwill1107
10-08-2008, 04:12 PM
Thanks...we'll give it a try!

Custom Search