PDA

View Full Version : demo page


Custom Search


copyman
04-26-2019, 02:22 PM
Usually only work on the bigger machines but have a few customers asking for smaller color machine. I see a lot of C3350's at the off lease warehouse where I buy my machines. It seems a lot like the C35 which was crap!

Is the Biz C3350 suppose to have a demo page where the config, & font lists usually are? Every K/M I've worked on the last several years have that demo page with the bird on it.
No big deal but it's nice to have have that page to check quality when servicing, etc.

Thanks

guitar9199
04-26-2019, 03:27 PM
- Press the Utility/Counter button
- Select User Settings
- Select Printer Settings
- Select Print Reports
- Select Configuration Page

copier tech
04-26-2019, 06:51 PM
- Press the Utility/Counter button
- Select User Settings
- Select Printer Settings
- Select Print Reports
- Select Configuration Page

Poster wants to print the DEMO page.

The C3350 doesn't have this option, possibly because its not actually made by Konica Minolta just "rebadged"

You can still do your gradation & test prints in CE mode.

allan
04-26-2019, 07:04 PM
No bird on this one.
But its a hell of a lot better than a c35 so don't hate on it yet.
Full dual tandem engine on a small machine!

copier tech
04-26-2019, 07:52 PM
No bird on this one.
But its a hell of a lot better than a c35 so don't hate on it yet.
Full dual tandem engine on a small machine!

Yes better than the C35 however still has its issues!

allan
04-26-2019, 08:02 PM
Yes better than the C35 however still has its issues!


Agreed..
Seem to be lucky with them. Its an acceptable machine as to where the C35 is a disgrace of a thing.
That and its relative the B36/42.

We should start known issue threads on the machine.
What KM machine do you think will have the longest one?

guitar9199
04-26-2019, 10:38 PM
Poster wants to print the DEMO page.

The C3350 doesn't have this option, possibly because its not actually made by Konica Minolta just "rebadged"

You can still do your gradation & test prints in CE mode.


My bad.... I thought all "Monicas" had the same test pages built in.

Will try and remember for the next one.... Thanks.

copyman
04-27-2019, 12:29 AM
Thanks everyone. Didn't realize it was rebadged. I know the small B&W 25e is a Muratec which the few I sold seem to be working decent. Is the C3350 also a Muratec? The control panel looks like a mini 4 series plus you enter service mode the same so figured it was K/M design. Never know know a days.

Synthohol
04-27-2019, 12:43 AM
put a few hi res pdfs on a flash drive and print from the units USB port.

blackcat4866
04-27-2019, 03:56 AM
Often it's hard to identify the KM re-bdges. KM usually writes their own firmware, so the KM experience is pretty uniform even on the Lexmark rebadges. =^..^=

copyman
04-27-2019, 05:40 AM
True, the exception is the Biz 25e which is 100% Muratec, including entering service mode the same as Muratec, etc

Custom Search