View Full Version : taskalfa 3500
Can i swap printer controller from one machine to an other without any problem?
Ropariva
04-30-2019, 01:36 AM
There is a small EEPROM (YC14)that must be swapped with the boards. This has serial numbers and life counts. Otherwise will be fine
Scottb
04-30-2019, 04:31 PM
also for best results only swap one board at a time between power cycles
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.