pudgi300
10-09-2008, 12:40 AM
Hi,
PF-601 tray 5 will not lift. Swapped out motor with tray 4 and motor is good. Had to give machine back to customer but have to get tray 4 going for heavy stock job. I have checked the connectors for paper and cleaned sensors in pickup. Checked dipswt 21 and tray 4 and 5 are both 0. Did not get chance to take any voltage reading on motor. When it happen customer said the tray just dropped and would not go up anymore. Cables are all on and handcycled platform up and down . Thanks for any help.
Later Warren
PF-601 tray 5 will not lift. Swapped out motor with tray 4 and motor is good. Had to give machine back to customer but have to get tray 4 going for heavy stock job. I have checked the connectors for paper and cleaned sensors in pickup. Checked dipswt 21 and tray 4 and 5 are both 0. Did not get chance to take any voltage reading on motor. When it happen customer said the tray just dropped and would not go up anymore. Cables are all on and handcycled platform up and down . Thanks for any help.
Later Warren