PDA

View Full Version : Minolta bizhub 223 repair


Custom Search


zoraldinho
05-24-2019, 08:05 AM
Hi there,


Have Minolta bizhub 223. Next week, I'll be changing the developer and drum.do I have to do something in the service mode after that? (Don't have SM):rolleyes:
Thanks.

Z

Canon tech

tsbservice
05-24-2019, 08:25 AM
You have to clear some counters and run Stabilization+ Gradations.
PM me if need manual.

zoraldinho
05-24-2019, 08:38 AM
I will. Thank you in advance!

pinspin
05-24-2019, 10:22 AM
Execute TCR Sensor Adj -
SP / Image Proc Adj / TCR Sensor Adj / Black / Copy

tsbservice
05-24-2019, 12:38 PM
Execute TCR Sensor Adj -
SP / Image Proc Adj / TCR Sensor Adj / Black / Copy

Ahh, almost forgot the most important thing :D
PM sent.

Toxic
05-24-2019, 08:47 PM
I do first drum dry from admin menu :)
Probably it does not have important role but done that everytime on this series like manual says, old habit. :)

srvctec
05-24-2019, 09:03 PM
I do first drum dry from admin menu :)
Probably it does not have important role but done that everytime on this series like manual says, old habit. :)

Same here. It just gets the cleaning unit cleaned out so when you remove the drum unit, toner doesn't go all over the place from the tube connecting to the developing unit. Works quite well, in that regard.

Custom Search