View Full Version : Bizhub 42 with Scanner Locked error (belt broken)
ricmartinho
06-07-2019, 12:04 AM
Hello!
We have a machine that has the scanner belt broken. I looked in the Parts Catalog but there's no part number for the belt, only for the entire scanner.
Does anyone know the part number for the belt?
Thanks
ricmartinho
06-07-2019, 12:19 AM
I've found it! The part number is A121PP0N00.
Should've searched before posting. Hope it helps someone.
Downunder
07-02-2019, 02:26 AM
try this number
A121PP0N02
907tec
07-02-2019, 07:51 PM
Still can't believe that they continue to use the C35 scanner belt, despite the insane failure rate. I've ordered so many of those belts that the mere sight of the part number raises my blood pressure.
srvctec
07-02-2019, 09:52 PM
Still can't believe that they continue to use the C35 scanner belt, despite the insane failure rate. I've ordered so many of those belts that the mere sight of the part number raises my blood pressure.
Yeah, they are complete junk because of the crimp going the wrong way. All they needed to do to fix the issue was to put 3 or 4 crimps, PERPENDICULAR to the belt instead of in parallel with it and it would probably last for a very long time. With the crimp in the brass part right in the center and parallel to the fibers of the belt, it's no wonder the thing slips apart.
moses smith
07-03-2019, 02:41 PM
Hi
u can use the scanner belt of any inkjet or hp inkjet that has the same profile. i use a small cable tie to fix the ends.:cool:
Sysco
07-04-2019, 10:40 PM
Here is the part number:
A121PP0N02
Scanner Belt
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.