PDA

View Full Version : Error Code Bizhub c364e error d390 reset nvram


Custom Search


pasek2051
06-08-2019, 04:10 PM
Witajcie. Wszedłem w posiadanie narzędzia do resetowania nvramu do bizhuba. Gdy wykonuje procedurę po włączeniu maszyna pokazuje blad d390 i ma zero na liczniku tak jak chce. Po dwukrotnym wyłączeniu można przywrócić dane i wszystko wraca do normy wraz z licznikami. Moje pytanie, co mam zrobić żeby nie przywracać danych o licznikach a kod błędu zniknął?

allan
06-08-2019, 04:34 PM
No speaky Polish...
English please.

pasek2051
06-08-2019, 04:40 PM
after resetting the nvram I have reset the counter and error code d390. When the data is restored, the error disappears and the old meter value returns. How to leave the counter in value 0.
Prześlij opinię
Historia
Zapisane
Społeczność

Synthohol
06-08-2019, 04:57 PM
you dont.
only criminals and thieves leave it at zero.
don't be a thief.

pasek2051
06-09-2019, 06:14 PM
it's not for sale, I have a customer with a low meter requirement. I want to remove it and admit that it had 900,000 copies.
Prześlij opinię
Historia
Zapisane
Społeczność

Synthohol
06-09-2019, 06:30 PM
just stop.
you are embarrassing.

tsbservice
06-09-2019, 06:46 PM
just stop.
you are embarrassing.

Yes, he is.
Just ignore those fools.
Their threads will be sinking fast if no one reply.

Custom Search