PDA

View Full Version : FS534SD folding limit


Custom Search


rrrohan
06-11-2019, 09:08 AM
Long shot.

Customer has a document thats 80 pages of A4. Once you center staple and fold with A3 it ends up being 20 A3 sheets. They want to center staple and fold.
Problem is they have a pre printed cover page they add via bypass tray. Now its 21 A3 sheets.

The finisher just ignores the fold operation as it exceeds the 20 sheet limit.

Is there anyway around this short of adjusting the document so it fits on 80 pages? Its only 1 more sheet of paper after all

emujo2
06-11-2019, 01:08 PM
Maximum folding is 20 sheets, in cover mode you have 1 cover sheet and 19 additional sheets that also add up to 20. 21 is over the range no matter what.

Synthohol
06-11-2019, 01:11 PM
and if the cover is set to thick paper its even less.

tsbservice
06-11-2019, 05:28 PM
Tell them to edit document(if possible) and make document to fit on 19 A3 sheets instead of 20.
Or upgrade them with SD-512, up to 35 sets stitching/folding.

Custom Search