sc29-10 and sc27-04 on 8050

[newtek]

Im getting error sc29-10 on startup.
than when initilizing developer units error sc27-04

Now i just moved from clc1150 to Konica 8050 so im doing all this by guess work, if anyone can help me with these error codes also. I would like to get the service field manual. my email is info@photoceramicart.com
tryed downloading in emule but it takes for ever.
any help plz

[JustManuals]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from New Home Page Title (http://www.justmanuals.com)


Paul@justmanuals.com

[ni311]

29-10 is something about drum potential sensor output abnormality, I believe. Check the sensor.

[kmcopytech]

SC27-4:
Output of toner density sensor/K (TDS K) cannot be controlled.

check:
PRCB and TDS/K;

SC29-10:
Dmax control /K resulted in an abnormality.

check:
Gamma sensor (PS11);
PRCB;
developing unit K

good luck!!!