PDA

View Full Version : Miscellaneous bizhub 361 curl at duplex after exiting from fuser


Custom Search


dannys
07-01-2019, 06:27 AM
Hello,

At one bizhub 361 when printing at dublex the papers came out curled, we change tha paper - same thing , we change the fixing unit except the exit roller (4030 5802 01 ROLLER) same thing. Any ideas;

Thanx in advance .

dannys
07-16-2019, 02:45 PM
The papers get out great if at tray we put the paper in R.

It is likely that it is due to the gears right on fuser that give movement to exit rollers?

Custom Search