PDA

View Full Version : Error Code С 287 , codes C FA17, C 40C5


Custom Search


pinspin
07-07-2019, 06:13 PM
Hello. Copier C287 showed the codes С9402, С6751, СFА17, С40С5. We replaced CCD and performed Firmware Update , but we get codes СFА17, С40С5 (for example ,when resizing a copy). This copier does not have HDD and network connection.We will be grateful for any advice. Thanks.

tsbservice
07-07-2019, 07:05 PM
After replacing the CCD Unit, it must be calibrated, did you do it?

pinspin
07-07-2019, 07:19 PM
After replacing the CCD Unit, it must be calibrated, did you do it?

Yes

Woxner
07-07-2019, 08:44 PM
are you saying the hdd is missing and the network port is dead? this comes with hdd. did you use w4 firmware and special. also run the self diagnostic. but mfp could be fried

PTAIYAT
07-01-2022, 01:30 PM
Change of flat cable and for the case of C-FA17 & C-40C5 do different firmware version update.

byronf
07-01-2022, 04:43 PM
Hi,

Change flat cable no.6 A7AHN12V01.
If you haven't done this repair previously you might aswell order x2 A7AHM90000 incase the locks break.

53846

Custom Search