C-1105

[emujo2]

Have a tech troubleshooting C-1105 error on C458..(FS-536). After numerous trips he swapped finisher with another C458...C-1105 did not travel with problem finisher, but popped on original MFP..Not causing codes on other MFP. Any ideas on what, outside of the eject arms, could be causing this code? TIA E

[tsbservice]

Have no idea, but I would update FW...just in case.

[Woxner]

this is a firmware bug on the 8 series. it has been correct in latest fw. do the base and the special

[emujo2]

I do not see anything about this error in the base or special w5 f/w..Can you be a little more specific? Thanks

[tsbservice]

Any news on this?