PDA

View Full Version : C558 Tray 3 jam and noise


Custom Search


jwai
07-26-2019, 03:38 PM
Hi guys,

I have a C558 that sometimes jam on tray 3, and strange noise while feeding on that tray.
I tried to replace the rollers, one way bearings and driving motor of that tray however the issue still stay.
Any suggestions for this case?

copier addict
07-26-2019, 04:18 PM
Hi guys,

I have a C558 that sometimes jam on tray 3, and strange noise while feeding on that tray.
I tried to replace the rollers, one way bearings and driving motor of that tray however the issue still stay.
Any suggestions for this case?

Jam code?
Paper size?
Paper orientation?
Is it an LCT or universal tray?

kingarthur
07-26-2019, 04:30 PM
I had one that the shaft that the DFPV roller sits on was actually bent slightly

jwai
07-27-2019, 05:19 AM
Jam code?
Paper size?
Paper orientation?
Is it an LCT or universal tray?

It's A4 crosswise , and there is PC-215 ( 4 universal trays ).

jwai
07-27-2019, 05:28 AM
I had one that the shaft that the DFPV roller sits on was actually bent slightly

You said the shaft of double feed prevention roller, is A161-5634-00?

jwai
08-08-2019, 12:11 PM
Jam code?
Paper size?
Paper orientation?
Is it an LCT or universal tray?

Jam code is 20-02.

blackcat4866
08-08-2019, 01:09 PM
bizhub 658e with PC-415, J9901 and J20-02 (http://www.copytechnet.com/forums/konica-minolta/134475-bizhub-658e-pc-415-j9901-j20-02-a.html)

How about this? =^..^=

jwai
08-08-2019, 03:23 PM
bizhub 658e with PC-415, J9901 and J20-02 (http://www.copytechnet.com/forums/konica-minolta/134475-bizhub-658e-pc-415-j9901-j20-02-a.html)

How about this? =^..^=

Thank you for your information, let's try it!

jwai
08-09-2019, 09:12 AM
I tried to exchanged the gears unit with tray 4, the problem seems be solved !

Custom Search